IKEA Skadis Wall Panel, 6×6, 5×5, 4×4 holes

IKEA Skadis compliant wall panel with 6×6, 5×5, 4×4 holes and other sizes.

The panels are 240x240mm, 200x200mm, 160x160mm.

More sizes are inluded.

The standoffs are 25mm.

The front will be 30mm from the wall.

Mounted with 4x screws, ideall sunken head.

Print with PLA, 10% gyroid infill, 3 top, 3 bottom layers, 3 perimeters.

This will give you decent stability and about 150g of filament usage per panel.

Let me know if you need other sizes, I will create them on demand and upload here.